 |
|
|
Cooling
To run the system is real easy - just do the following:
1. Turn on the pump (on the floor underneath the mounting table of
R-AXIS) that has a purple tubing connected to the control station and then
to the cooling tube. Sometimes you may have to wait for a few seconds for
the pump to start. Sometimes you may have to hit the pump with you palm
a couple of times to jump start it. This strange thing has something to
do with the tank pressure inside.
2. Turn the control station's power on and flip the control switch
to the RUN position.
That's all you need to do. |
|
|
|
